Canon VB-C300 - Manual (Page 43)

2-19
Installing the Camera
When Mounting the Camera on the Ceiling with the Dome Housing (VB-RD41S-C/S) (Optional)
Follow the steps below to mount the camera on the ceiling with the Indoor Dome Housing (optional).
See the outer view of the dome (
→ P.3-2) to determine the mounting position and orientation.
Note
Observe the precautions in “Before Setting Up the Camera” (
→ P.2-14) and follow
them before mounting the camera.
a WARNING:
Install the camera securely.
● When installing the VB-C300 on the ceiling, contact your Canon dealer.
● When installing the VB-C300 on the ceiling, check that the ceiling is strong enough
to bear the weight of the VB-C300 including the In-Ceiling Bracket. Installation in a
weak location could result in the VB-C300 falling and causing serious injury.
● At least once a year, check for looseness in the camera installation mount.
● When routing the cables, pay much attention not to damage the indoor wiring or
piping.
Side View of mounting
OUT IN-2 IN-1
BA 100/10BT VIDEO OUT
LINE IN
DC IN 12-13V AC IN 24V LINE OUT
Safety Wire
Dome
LAN cable
VB-C300
In-Ceiling Bracket Backside Ceiling Bracket
Roof space
Ceiling board
1. Mount the camera to the In-Ceiling Bracket with the four screws.
Use the screws supplied with the Dome Housing.
DC IN 12 -1 3V AC IN 24 V
10 0/ 10 BT VID EO OU T
LIN E IN LIN E OU T
OU T IN -2 IN -1
B A
Setting Up the Camera
Continued on the following page.
a
Fix to an anchor
or structure