Canon VB-C300 - Manual (Page 26)

2-2
Setup Workflow
The flow for setting up the camera and view the camera video involves; connecting the camera
with the PC over the network via a HUB and perform the initial settings. Installing the necessary
software on the PC, and checking to see if you can see video from the camera. Mounting the
camera, and the reboot.
Supplied Setup CD-ROM
1 Connect the camera to the network and perform the initial setting
Connect the camera to the PC via a HUB (
→ P.2-4).
Please ask our sales person when using the PoE HUB and Midspan.
Use a shielded LAN (Categrory 5 or above) cable for VB-C300 connection.
Insert the supplied Setup CD-ROM into your PC and perform the initial setting (
→ P.2-7).
LAN cable
VB-C300
HUB
2 Install the software and view the camera video
Install the necessary software (
→ P.2-11).