Canon VB-C300 - Manual (Page 32)

2-8
2. The VB Initial Setup Tool automatically
detects the camera connected to the
network, and displays its MAC address,
IP address, and model name.
The factory default IP address is set to
“192.168.100.1”
The MAC address can be found on the label
attached on the bottom of the unit.
Note that VB Initial Setup Tool (VBSetup.exe)
cannot be used across subnets.
Click the MAC address to select it, and click
“Initial Setup”.
3. Enter the user name “root” and the
factory default password “VB-C300”
(case sensitive) then enter the IP
address and subnet mask.
If you do not want to specify a default gateway
address, disable the “Enter a Default Gateway
Address” box.
Once you have entered your settings, click “OK”.
Click to select
Tip
● The factory default password is “VB-C300.” Be sure to change it to ensure security
(
→ dOperation Guide P.1-6).
● The MAC address for this unit is shown on the bottom of the VB-C300 (→ P.1-8).
● The IP address 192.168.100.1 is used as the factory default setting. Please set an
IP address that suits the environment in which the VB-300 is to be used.
Connect the Camera to the Network and Perform the Initial Setting
Note
For Windows XP SP2 users, see “Note on Windows XP SP2” (
→ P.1-5). This Note
holds true for users who have turned on Windows Firewall with Windows Server
2003 Standard Edition (SP1).