Canon PowerShot A2500 - Manual (Page 13)

13
1
2
3
4
5
6
7
8
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
Playback Mode
2 Choose [Date/Time].
z z Move the zoom lever to choose the [ 3]
tab.
z z Press the < o><p> buttons to choose
[Date/Time], and then press the < m>
button.
3 Change the date and time.
z z Follow step 2 in “Setting the Date and
Time” ( = 12) to adjust the settings.
z z Press the < n> button to close the
menu.
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a
charged battery or connect the camera to an AC adapter kit (sold separately,
= 80), even if the camera is left off.
• Once the date/time battery is depleted, the [Date/Time] screen will be
displayed when you turn the camera on. Follow the steps in “Setting the Date
and Time” ( = 12) to set the date and time.
4 Finish the setup process.
z z Press the < m> button to complete the
setting. The setting screen is no longer
displayed.
z z Once the date and time have been set,
the [Date/Time] screen is no longer
displayed.
z z To turn off the camera, press the power
button.
• Unless you set the date and time, the [Date/Time] screen will be
displayed each time you turn the camera on. Specify the correct
information.
• To set daylight saving time (1 hour ahead), choose [ ] in step 2 and then
choose [ ] by pressing the < o><p> buttons.
Changing the Date and Time
Adjust the date and time as follows.
1 Access the camera menu.
z z Press the < n> button.