Canon PowerShot A2500 - Manual (Page 61)

61
1
2
3
4
5
6
7
8
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
Playback Mode
3 Play movies.
z z To start playback, press the < m> button,
press the < o><p> buttons to choose
[ ], and then press the < m> button
again.
4 Adjust the volume.
z z Press the < o><p> buttons to adjust the
volume.
z z To adjust the volume when the bar is no
longer displayed, press the < o><p>
buttons.
5 Pause playback.
z z To pause or resume playback, press the
< m> button.
X X After the movie is finished, [ ] is
displayed.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
• If you prefer to have the most recent shot displayed when you enter Playback
mode, press the < n> button, and on the [1] tab, choose [Resume] and
then [Last shot].
• To change the transition shown between images, press the < n> button,
choose [Transition] on the [ 1] tab, and then press the <q><r> buttons to
choose the effect.
Volume Indicator
Still Images Movies
Viewing
After shooting images or movies, you can view them on the screen as
follows.
1 Enter Playback mode.
z z Press the < 1> button.
X X Your last shot is displayed.
2 Browse through your images.
z z To view the previous image, press the
< q> button. To view the next image,
press the < r> button.
z z Press and hold the < q><r> buttons to
browse through images quickly. Images
appear grainy at this time.
z z Movies are identified by a [ ] icon. To
play movies, go to step 3.