Canon PowerShot A2500 User Manual

Page 30

Advertising
background image

30

1

2

3
4
5
6
7
8

Cover
Preliminary Notes and

Legal Information
Contents:

Basic Operations

Advanced Guide

Camera Basics
Smart Auto

Mode
Other Shooting

Modes
P Mode

Setting Menu

Accessories

Appendix

Index

Basic Guide

Playback Mode

Still Images/Movies

If the camera is turned on while the <

p> button is held down, the

camera will no longer sound. To activate sounds again, press the

<

n> button and choose [Mute] on the [3] tab, and then press

the <

q><r> buttons to choose [Off].

Still Images

A flashing [ ] icon warns that images are more likely to be blurred

by camera shake. In this case, mount the camera on a tripod or take

other measures to keep it still.

If your shots are dark despite the flash firing, move closer to the

subject. For details on the flash range, see “Flash Range” (

=

104).

The subject may be too close if the camera only beeps once when

you press the shutter button halfway. For details on the focusing

range (shooting range), see “Shooting Range” (

=

104).

To reduce red-eye and to assist in focusing, the lamp may be

activated when shooting in low-light conditions.

A blinking [

h] icon displayed when you attempt to shoot indicates

that shooting is not possible until the flash has finished recharging.

Shooting can resume as soon as the flash is ready, so either press

the shutter button all the way down and wait, or release it and press

it again.

You can change how long images are displayed after shots (

=

59).

Shooting Movies

Start shooting.

z

z

Press the movie button. The camera

beeps once as recording begins, and

[●Rec] is displayed with the elapsed time.

X

X

Black bars displayed on the top and

bottom edges of the screen indicate

image areas not recorded.

X

X

Frames displayed around any detected

faces indicate that they are in focus.

z

z

Once recording begins, take your finger

off the movie button.

Resize the subject and

recompose the shot as needed.

z

z

To resize the subject, repeat the

operations in step 3 (

=

29).

However, note that the sound of camera

operations will be recorded, and movies

shot at zoom factors shown in blue will

look grainy.

z

z

When you recompose shots, the

focus, brightness, and colors will be

automatically adjusted.

Finish shooting.

z

z

Press the movie button again to stop

shooting. The camera beeps twice as

recording stops.

X

X

Recording will stop automatically when

the memory card becomes full.

Elapsed Time

Advertising