Canon PowerShot A2500 - Manual (Page 95)

95
1
2
3
4
5
6
7
8
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
Playback Mode
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
• The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way ( = 11).
Memory card locked
• The write-protect tab of the memory card is set to the locked position. Switch the
write-protect tab to the unlocked position ( = 11).
Cannot record!
• Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way ( = 11).
Memory card error ( = 74)
• If the same error message is displayed even after you have formatted a supported
memory card ( = 2) and have inserted it facing the correct way, contact a Canon
Customer Support Help Desk ( = 11).
Insufficient space on card
• There is not enough free space on the memory card to shoot ( = 28, 39, 47)
or edit images ( = 69 – 71). Either erase unneeded images ( = 67) or insert a
memory card with enough free space ( = 11).
Charge the battery ( = 10)
No Image.
• The memory card does not contain any images that can be displayed.
Protected! ( = 65)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back MOV/Cannot play back MP4/RAW
• Unsupported or corrupt images cannot be displayed.
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
Memory Card
The memory card is not recognized.
• Restart the camera, with the memory card in it ( = 11).
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
• Press the < 1> button to enter Playback mode. Hold the <n> button down as
you press the < o> and <m> buttons at the same time. On the next screen, press
the < q><r> buttons to choose [B], and then press the <m> button.
Eye-Fi Cards
Cannot transfer images ( = 90).