Setting self-clean cycle, Setting self-clean, Setting delayed self-clean – Electrolux EW30DS75KS User Manual

Page 45: Important

Advertising
background image

45

Setting self-clean

The clean feature provides 3 different choices for

self-cleaning the oven. Set the clean for

lite (2 hrs),

med (3 hrs) or heavy soils (4 hrs). The example

below shows setting the oven for self-clean to be-

gin immediately using a medium (3 hour) setting:

Setting delayed self-clean

You may wish to set your appliance to perform a

self-clean cycle sometime later (up to 12 hours

later). The

END TIME key will determine when the

cleaning will stop.

You will need to set the

END TIME out far enough

to allow for the type of clean cycle you choose

(2-3-4 hours). Remember to add 30-40 additional

minutes for the oven to cool enough and the oven

door to unlock.

The example below shows setting the oven for a

lite (2 hour) self-clean cycle to end at 8:00 o’clock:

After pressing start, the motorized oven door latch

will automatically lock the door. The DOOR lock

icon will flash (Fig. 1). Once the door has locked

the DOOR lock icon will remain on through the

entire self-clean cycle.

After self-clean, the oven may take about 30-40

minutes to cool and unlock. A

Hot message (Fig.

2) will display during this period. During cooling the

DOOR lock icon will flash and disappear indicating

that the door has unlocked.

Fig. 2

Fig. 1

Example

Step

Press

1. Remove racks and supports

and press

UPPER OVEN

UPPER

OVEN

2. Press

ClEAN

3. Select

MED or

select lite or heavy

4. Press

START

Example

Step

Press

1. Remove racks and

press

UPPER OVEN

UPPER

OVEN

2. Press

ClEAN

3. Select

lITE

4. Press

COOK OPTIONS

5. Press

END TIME

6. Enter

800

7. Press

START

Setting Self-Clean Cycle

NOTE

You may press CANCEL any time during the

cleaning process. After cancelling the self-clean

cycle, do not attempt to open the oven door until

the DOOR lock icon turns off.

IMPORTANT

• A self-clean cycle will not start if the appliance

has the CONTROL LOCK turned on.

• If a self-clean cycle was started but did not

finish due to a power failure, your oven may

not be completely cleaned. After power

has been restored and the oven door has

unlocked, set for another self-clean if needed.

Advertising