Care and cleaning, Cleaning cooktop, burner grates, caps and heads, Important – Electrolux EW30DS75KS User Manual

Page 50

Advertising
background image

50

Care and Cleaning

Your appliance is shipped with the burner heads

and burner caps in the correct locations. Before

using your gas appliance be sure to:
● Follow installation instructions before operating.

● Remove all packing tape from cooktop area.

Burner Caps

Should you ever need to remove the burner caps

for cleaning lift the burner cap off the burner

head. Clean heavy soils with an absorbent cloth.

Rinse with a clean, damp cloth and immediately

thoroughly dry including the bottom and inside of

the cap. Do not use harsh abrasive cleaners. They

can scratch the porcelain on the cap. Do not clean

burner caps in dishwasher.
When placing the burner caps, see Important note

below.

Cleaning cooktop, burner

grates, caps and heads

The cooktop is designed to make cleaning easier.

Because the gas burner are sealed, cleanups are

easy when spillovers are cleaned up immediately.

Cleaning the cooktop

If a spill occurs on or in the recessed or countered

areas, blot up spill with an absorbent cloth. Rinse

with a clean, damp cloth and wipe dry. Do not use

harsh abrasive cleaners on the cooktop. They can

scratch the porcelain. Completely rinse any mild

cleaners used from the surface or the porcelain

cooktop may become damaged during future

heating.

Cleaning the grates

The burner grates are dishwasher safe and may be

cleaned in the dishwasher. Remove any excessive

soils before placing in the dishwasher.

IMPORTANT

Do not use spray oven cleaners on the cooktop.

IMPORTANT

For proper gas flow and ignition of the burners

DO NOT allow spills, food, cleaning

agents or any other material to enter the gas

orifice opening.

The cooktop is not removable. Do not attempt

to remove or lift the cooktop.

IMPORTANT

When placing the burner caps on the cooktop, be

sure the burner caps are seated firmly on top of

burner heads. Improper flame size and uneven

heating may result when any surface burners are

turned ON and the burner caps are not seated

correctly.

Do not remove any parts from the cooktop

until they have completely cooled and are

safe to handle.

To avoid possible burns use care when

cleaning the cooktop.

DO NOT attempt to clean

the cooktop whenever the cooktop or burner

heads are still hot.

To avoid possible burns DO NOT attempt any

of the following cleaning instructions provided

before turning OFF all of the surface burners

and allow them to cool.

To avoid possible burns DO NOT attempt to

operate the surface burners without the burner

caps.

Advertising