Electrolux EI30IF40LS - Manual (Page 35)

Setting Oven Controls 35
Restoring control to factory default settings
Your appliance is set with a number of predetermined oven con-
trol settings. Over time you may make changes to the original
factory settings.
The following functions or features have user programmable
options or adjustments that may have been changed from the
default settings.
•
Clock 12-hour or 24-hour display mode
• 12-Hour Energy Savings or continuous bake mode
• Tone volume
• Oven temperature display mode (F° or C°)
• Any oven temperature adjustment made
• Any saved “my favorite”
IMPORTANT! Before restoring, be aware that any previous
changes made to the oven control settings will be erased once
the keypad is pressed. This includes any temperature offset
made for the oven when baking.
To restore factory default settings:
Interior oven light
The interior oven light will automatically turn ON when the door
is open.
Press to turn the interior oven light ON and OFF whenever
the oven door is closed.
The oven light will not operate during a self clean cycle.
The interior oven light is located at the upper left rear wall of the
oven interior and is covered with a glass shield held in place
with a wire holder. The glass shield must be in place whenever
the oven is in use.
To change the interior light, see Changing the oven light in the
“Care and Cleaning” section.
1. Press and hold the number 7 key for 6 sec-
onds. A beep will sound and rST P S will
appear in the display (
Figure 62 ).
7
2. Press START to accept
Fig. 62 Oven ready to reset to default settings
START