Audiovox PAV-8000D - Manual (Page 10)

9
5.4. Volume Control
Rotate the (SEL/LOC) knob
6
to Increase (Right) or Decrease (Left) the volume.
Figure 7. Volume Control
5.5. Displaying and Setting Time
To display the current Time on the LCD Screen, Press the [DISP] button
3
, when the unit’s in “standby” state,
indicated time on LCD will be current time. NOTE: in “standby” state, current time is automatically indicated
on LCD; in other modes, press this key to display the time.
Figure 8. Displaying and Setting Time
5.5.1 Set Time
To set HOURS and MINUTES and to switch between them Press and Hold the [DISP] button
3
for 2 Seconds
to enter the Time Set Mode. Once in this mode, press the switch to toggle between Hour and Minute settings .
Press the [? ? |] button
4
? to increase time. Press the [| |? ? ]
5
button to decrease time.
Figure 9. Setting Time
5.5.2 System Setup
To enter the System Setup Mode, Press and Hold the [DISP] button for 2 Seconds. Press the [? ? |] ?and the
[ |? ? ] ?buttons select setup item, use [DISP] button to toggle between values and enter.
Figure 10. System Setup
6
AM 12:45
3
5
4
3
5
4
3