Audiovox PAV-8000D - Manual (Page 9)

8
11. Preset 4 / 2.Channel —5.1 Channel Switch (4/2 -6CH)
Button
12. Preset 5 / Repeat Playback (5/RPT) Button
13. Preset 6 / Stop playback (6/STOP) Button
14. Pause & Playback Button
15. Mode Switching Button
16. Angle Select/Direction (DOWN) Button
17. Direction (RIGHT) Button
18. Direction (LEFT) Button
19. AS/PS ENTER Button
1. Open/Close Front Panel Button and Eject Disc
2. Band Select Button (BAND)
3. Display (DISP) Button
4. Channel /Selection UP/Next Button
5. Channel /Selection Down /Previous Button
6. Select Local Distance Control Button (SEL/LOC)
7. Mute Control /Power (ON/OFF) Button
8. Preset 1 / Previous Disc Select (1/DISC-) Button
9. Preset 2 / Next Disc Select (2/DISC+) Button
10. Preset 3 / Random/Scan Playback (3/P.MODE) Button
4. FRONT PANEL
Figure 4. Front Panel
5. BASIC OPERATION
5.1. Powering System On
Press the Power ON/OFF( ) button
7
to turn the PAV-8000D System Power ON. Press and hold the ( )
button for 2 Sec. to turn the system Power OFF
NOTE: This button
7
is also used to MUTE the audio sound.
5.2. Mute Control
When the unit is on, momentarily press the Mute Button ( ) button
7
? to mute the sound; Press it again, the
unit will exit the MUTE mode.
Figure 5. Mute Control
5.3. Mode Switch
Press the ( MODE) button
bq
to switch between the different modes if a CD or DVD is loaded. If a CD Changer
(CDC) is used with the system, the MODE button will also be used to switch to CDC mode.
Figure 6. Mode Switch
7
bq
9
8 7
2
1
6
5
cl bu bt
bs
bq bp bo bn bm bl
4 3
br