AT&T 9370 - Manual (Page 16)

Delete an Announcement
1 If the announcement you want to delete is the currently selected
announcement (
A, B, or AO) go to Step 2. If not, select the
announcement by following the instructions in “Select Your
Announcement” on page 11, then go to
Step 2 below.
2 Press
7 (ANNC) on the base.
3 Press
D while the announcement is playing. The system
beeps once when the announcement is deleted.
Set the Clock
1 Press
* (CHANGE). The Message Window displays
CH .
2 Press
8 (CLOCK). The system announces the current day setting.
To change the day setting, hold down
4 (REPEAT) or 6 (SKIP)
until the correct day is announced. Then release the button.
3 Press
8 (CLOCK). The system announces the current hour
setting. To change the hour setting, hold down
4 (REPEAT) or 6
(SKIP) until the correct hour is announced. Then release the
button.
4 Press
8 (CLOCK). The system announces the current minutes
setting. To change the minutes setting, hold down
4 (REPEAT) or
6 (SKIP) until the correct minutes are announced. Then release
the button.
8 Press
8 (CLOCK). The system announces the new day and time.
To check the current clock setting at any time, press
8 (CLOCK).
FEATURE SETUP
14
9370_to make pdf_1ATT 6/12/00 2:06 PM Page 14