AT&T 9370 - Manual (Page 38)

ANSWERING SYSTEM OPERATION
AT CORDLESS HANDSET OR TOUCH TONE PHONE
36
Command:
Hang up, or if you are using the handset,
press
a
Press
* 9, then press 9; system
announces current selection. Press
6 or
4 to hear other selections, press 9 to
save, press
5 to exit
Press
* 8; system announces day
setting, followed by,“To change, press 6
or 4. To change the hour, press 8
.” Press
4 to move back a day, or 6 to move
forward a day.
Press
8; system announces hour setting,
followed by,“To change, press 6 or 4. To
change the minutes, press 8
.” Press
4 to
decrease or
6 to increase hour.
Follow the same procedure to change
minutes setting. System announces new
time setting
Press
0; system announces current status
Press
* 0; system announces,“The
machine is off ”
When system is off, it answers after 10
rings, announces “The machine is off”
and beeps twice. Press
* 0; system
announces,“The machine is on”
Press
# when system answers after 10
rings; begin speaking after system beeps
NOTE: The system beeps twice to indicate it is ready to accept a
command.
Remote Access Commands
Function:
End remote access call
Select an Outgoing
Announcement
Set the Clock
Review On/Off Status
Turn System Off
Turn System On
Record Message When
System is Off
9370_to make pdf_1ATT 6/12/00 2:07 PM Page 36