Aastra Telecom SIP 57I - Manual (Page 133)

Network Settings
41-001160-00, Release 2.1, Rev 04 4-9
Configuring Network and Session Initiation Protocol (SIP) Features
Configuring the IP Phones • Secondary DNS
You can configure the network settings using the configuration files, the IP phone
UI, or the Aastra Web UI.
Note: If you disable DHCP on the phone, the phone uses the TFTP
protocol as the default server protocol. If you want to specify a different
protocol to use, see
“Configuration Server Protocol” on page 4-79 .
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Network
Settings” on page A-6.
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2 Select Administrator Menu.
3 Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4 Select Network Settings.
5 Select IP Address and enter the IP address of the phone.
6 Select Subnet Mask and enter the subnet mask.
7 Select Gateway and enter the gateway address.
8 Select DNS and enter a Primary and/or Secondary DNS server.
9 Press Done to save the changes.
The IP phone is manually configured.