Aastra Telecom SIP 57I - Manual (Page 205)

Configuration Server Protocol
41-001160-00, Release 2.1, Rev 04 4-81
Configuring Network and Session Initiation Protocol (SIP) Features
Configuring the IP Phones
9 Enter the IP address of the protocol server (in dotted decimal format).
Use the following table to configure the applicable server.
IP Phone UI
Step Action
TFTP Settings
- Select Primary TFTP
- Enter the IP address or qualified domain name of the primary TFTP server.
- Press Done to save the change.
Optional: You can also configure an Alternate TFTP server if required by selecting the
“Alternate TFTP” selection and configuring an IP address or qualified domain name for the
alternate TFTP server.
- From the TFTP Settings menu, select “Select TFTP”.
- Press Change to select the “Primary” or “Alternate” TFTP server to use for the phone.
- Press Done to save the change.
FTP Settings
- Select FTP Server.
- Enter the IP address of the FTP server.
- Press Done.
Optional: You can enter a username and password for accessing the FTP server if required:
- Select FTP Username.
- Enter a username for accessing the FTP server.
- Press Done.
- Select FTP Password.
- Enter a password for accessing the FTP server.
- Press Done.
HTTP Settings
- Select HTTP Server
- Enter the IP address of the HTTP server.
- Press Done.
- Select HTTP Path.
- Enter the HTTP sub-directory path name. If the IP phone’s files are located in a sub-directory
beneath the server’s HTTP root directory, the relative path to that sub-directory should be
entered in this field.
- Press Done.