Aastra Telecom SIP 57I - Manual (Page 165)

Network Settings
41-001160-00, Release 2.1, Rev 04 4-41
Configuring Network and Session Initiation Protocol (SIP) Features
Configuring the IP Phones
To set VLAN ID and priority for the PC Port (Port 1):
6 Enter a VLAN ID value from 1 to 4095 in the VLAN ID field. Default is 0.
Note: If you set the PC Port VLAN ID (Port 1) to 4095, all untagged packets are sent to this PC Port.
The following is an example of configuring the phone on a VLAN where all untagged packets are sent
to the passthrough port.
Example
You enable tagging as normal, enter a value for the LAN Port VLAN ID, and then set the PC
Port VLAN ID to 4095. The following example sets the phone to be on VLAN 3 but the PC Port
VLAN ID is configured as untagged..
7 Select a VLAN priority value from 0 to 7 for the PC Port in the Priority field. Default is 0.
8 Click to save your settings.
Aastra Web UI
Step Action