LG LSB5682SW - Manual (Page 10)

To scroll through the power levels quickly press and
hold the or key pads until the power level
desired is reached.
Note:
- 10 -
SURFACE CONTROLS COOKING
SETTING SURFACE CONTROLS
When changing from a high heat setting to a lower heat
setting, the surface unit may stop glowing. This is normal.
1. Press ON/OFF pad for the desired
element position. The display will
flash “ ”.
(If no further pads are pressed
within 10 seconds, the display will
disappear.)
2. Press ( ) pad once to turn on the
power level “Hi” or ( ) pad once
for “Lo”.
3. Use the ( )/( ) pad to choose
the desired power setting.
( )/( ) pad is continuously
accessible. (Adjustable at any time
while the element is ON.)
4. To turn off the unit after cooking,
press the ON/OFF pad once.
To turn on a single surface unit
(Right Rear, Left Rear, Left Front)
To scroll through the power levels quickly press and
hold the or key pads until the power level
desired is reached.
Note:
1. Press the ON/OFF pad. The display
will flash “ ”.
(If no further pads are pressed within
10 seconds, the display will disappear.)
2. Press the ELEMENT SIZE pad as
needed to select the desired burner
size. Default size is 9”. When first
selected, 12” size is ON. The light
above the ELEMENT SIZE pad
indicates which size surface unit is on.
3. Press ( ) pad once to turn on the
power level “Hi” or ( ) pad once for
“Lo”.
4. Use the ( )/( ) pad to choose the
desired power setting. ( )/( ) pad is
continuously accessible. (Adjustable at
any time while the element is ON.)
5. To turn off the unit after cooking, press
the ON/OFF pad once.
To turn on a dual surface unit (Right Front)
Recommended Surface Cooking
Settings
Recommended setting for the single & dual elements.
• Each time a pad is pressed a beep will sound.
• The power level decreases or increases by 0.5
from 9.0 through 3.0. (by 0.2 from 3.0 through
1.0)
• Lo is the lowest power level available.
Note:
• Each time a pad is pressed a beep will sound.
• The power level decreases or increases by 0.5 from
9.0 through 3.0. (by 0.2 from 3.0 through 1.0)
• Lo is the lowest power level available.
Note:
Setting Type of cooking
HIGH
(8.5 – Hi)
MEDIUM HIGH
(5.5 – 8.0)
MEDIUM
(3.5 – 5.0)
MEDIUM LOW
(2.2 – 3.0)
LOW/SIMMER
(Lo – 2.0)
Start most foods, bring water to a
boil or pan broiling.
Continue a rapid boil, fry or deep fat
fry.
Maintain a slow boil, thicken sauces
and gravies or steam vegetables.
Keep foods cooking, poach or stew
(2.8 or lower is a simmer setting).
Keep warm, melt or simmer.
CAUTION
• DO NOT touch surface elements until it
has cooled down sufficiently.
- The surface elements may still be hot and burns may
occur.
CAUTION
• DO NOT touch surface elements until it
has cooled down sufficiently.
- The surface elements may still be hot and burns may
occur.
CAUTION
• NEVER leave food unattended at high or
medium-high setting.
- Boilovers can cause smoking and greasy spillovers
may catch on fire.