Care & cleaning, Warning, Cleaning the accessory holder – LG LUV400T User Manual
Page 21: Cleaning the exterior of the vacuum cleaner
21
ENGLISH
4. Check the hose where it connects to back of the
body by pressing the release button on the top
end of the hose. And then check two cases, the
wand installed and uninstalled.
5. Turn the vacuum cleaner over, Check the agitator
inlet.
6. To check more thoroughly, remove the screw on
the port.
Cleaning the Accessory Holder
1. Wash the accessory holder using warm water.
2. Dry completely. Air dry only.
Cleaning the Exterior of the
Vacuum Cleaner
Wipe the exterior of the vacuum cleaner with a
clean, soft cloth that has been dipped in water and
wrung dry.
DO NOT allow water to enter any openings in the
vacuum cleaner.
DO NOT clean tools in dishwasher or clothes
washer. Wash tools in warm soapy water, rinse and
allow to air dry completely.
DO NOT use tools if they are wet.
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before
servicing. Failure to do so could result in
electrical shock or personal injury.
WARNING
CARE & CLEANING