LG LUV400T - Manual (Page 11)

11
ENGLISH
OPERATION
Adjusting the Pile Height
To adjust the pile height:
When it is necessary to raise and lower the front of
the vacuum for various carpet pile heights, press
the right foot pedal to adjust the pile height. Each
press will raise the agitator one notch.
Suggested pile height settings:
You may need to raise the height to make some
jobs easier, such as vacuuming area rugs and
longer pile rugs.
For maximum cleaning performance, the following
carpet height settings are recommended:
• L– for all types of carpet
• Higher settings– for very deep pile carpet where
easier pushing effort is desired, while maintaining
good cleaning performance.
There are 4 settings:
H = High
M = Medium
ML = Medium Low
L = Low
NOTE: If the vacuum is difficult to push, press the
Height adjustment to the next higher setting.
Attention: Special care is required when vacuuming
certain types of carpet or flooring. Always check the
carpet or floor covering manufacturer’s recommended
cleaning instructions before vacuuming.