LG LUV400T - Manual (Page 22)

22
Mattress Tool Maintenance
Note: Do not submerse the entire mattress tool
under water, this could damage the tool.
❶
Turn the dial, on the end of the container,
counterclockwise one half turn to allow the dirt
from the container to be sucked up into the
vacuum during use.
❷ To remove the dirt container dust bin from the
tool, turn the container clockwise to remove.
❸ Empty the dirt from the bin into the trash.
❹
To reinstall the dust container align the arrows
on the container and the tool and turn
counterclockwise until the container locks into
place.
❶ Turn the tool over and press in on the tabs to
release the cover plate.
❷ Remove and dirt or debris from inside the nozzle
using a dry cloth.
❸
Run the cover plate under warm water to
remove any dirt. Make sure the plate is dry
before the next use.
❹ Align the tabs of the cover plate to the mattress
tool.
❺ Push down the tabs to secure.
CARE & CLEANING