LG LUV200R - Manual (Page 15)

Thermal Overload Protection
This vacuum cleaner has a thermal overload
protector which automatically activates to protect
the vacuum cleaner from overheating. If a clog
disturbs the normal flow of air to the motor, the
thermal protector turns the motor off automatically
to allow the motor to cool in order to prevent
possible damage to the vacuum cleaner.
To correct the problem: Turn the vacuum cleaner
off and unplug the power cord.
Check for and remove clogs, if necessary.
Also check and clean any dirty filters.
Wait approximately 30 minutes and plug the
vacuum cleaner in and turn back on to see if the
motor protector has reset.
The thermal protector system will not reset until the
vacuum cleaner has completely cooled down.
The agitator has a built-in protection against motor
damage should the agitator jam.
If the agitator slows down or stops, the agitator
overload protector shuts off the agitator motor.
The suction motor will remain on at this time.
To correct problem: Turn off and unplug vacuum
cleaner, remove obstruction and press the reset
button.
Agitator Motor Overload
Protection
OPERATION
14