LG LUV200R - Manual (Page 18)

For optimal performance, check the filters every
3 months and clean when necessary.
Don’t close the dust tank lid without the Foam
Filter.
To Clean the Foam pre filter:
1. Remove the dust tank from the vacuum cleaner.
2. Lift up on the dust tank lid release and open the
lid.
3. Lift out the Foam pre filter.
4. Separate the foam filter from the filter frame.
5. Shake out any excess dirt or debris and rinse
the foam filter & filter frame with clean water.
A wet filter can cause permanent damage to
the vacuum cleaner.
Be sure filters are completely dry before
reinstalling.
CAUTION
Cleaning the Foam Pre Filter
6. Dry completely away from sunlight.
NEVER operate the vacuum cleaner with wet
filters or components!
If you notice a loss of suction and cleaning the
Foam filter does not help, you need to replace
the Foam filter. You can purchase additional foam
filters from LG by calling 1-800-243-0000(U.S.A),
1-888-542-2623 (Canada) and asking for parts
on page 6.
Cleaning the HEPA Filter
For optimal performance, check the filter
every 6 months and clean when necessary.
To Clean the HEPA Filter:
1. Remove the exhaust filter cover.
2. Lift out the filter by pressing the hook.
Exhaust filter cover
CARE & CLEANING
17
ENGLISH