LG LSCI307ST - Manual (Page 15)

15
ENGLISH
O P E R AT I N G I N S T RU C T I O N S
SETTING THE CONTROLS
SETTING THE POWER LEVEL
The power level for the selected Cooking Zone can
be set from to and (Boost).
To adjust the power level:
Touch the or pad for the selected
Cooking Zone.
Touching will set the power level to .
Touching will set the power level to .
Touch the or pad of the selected
Cooking Zone to increase or decrease the
power level.
If power level is selected, the Cooking Zone
will turn off after 5 seconds.
For faster power level adjustments, touch and
hold the or pads until the desired setting
is reached.
NOTE: Normal power
settings range in 1/2 step
increments for power levels
from 2 to 6 to allow
precision cooking. A dot will
appear next to the number
to indicate a 1/2 power level
step.
If the Cooking Zone or pads are held for
more 10 seconds, the timer display will show
the error message . To clear this error
message, press the ON/OFF pad for the
Cooking Zone you were setting. This message
does NOT relate to the timer pad.
To turn off the cooking zone:
Once cooking is complete, touch the ON/OFF
pad to turn the cooking zone OFF.
The corresponding cooking zone display witll
turn off.
If the POWER pad is touched instead of ON/
OFF, the entire cooktop will turn off.
NOTE:
• If the cookware or pan is moved from the center
of any active Cooking Zone for any reason, a
sensor will detect this and the Cooking Zone will
no longer heat. The display for that Cooking Zone
will flash the last power level setting for the
Cooking Zone.
• The Cooking Zone will remember the power level
setting for up to 90 seconds before the Cooking
Zone will automatically shut off.
WARNING
Your cooktop has a residual heat indicator
for each Cooking Zone. This indicator will warn
that this area has been used and is still giving off
enough heat to cause burns. Avoid touching the
burner when this indicator is shown. Although the
cooktop is OFF, the will stay lit until the
cooktop has cooled down.
1
2
3
1
2
3