LG LSCI307ST - Manual (Page 26)

26
I N S TA L L AT I O N I N S T RU C T I O N S
Install the retainer brackets to the bottom of the
cooktop; then snug the bolts against the bottom
of the countertop as shown.
NOTE: The retainer brackets MUST be installed to
meet local codes or, in their absence, with the
National Electrical Code ANSI/NFPA No. 70, latest
edition.
Perform a final operational check of the cooktop,
making sure the cooktop powers on properly and
that each Cooking Zone operates correctly. Refer
to the Operating Instructions in this guide for
details.
MODEL AND SERIAL NUMBER LOCATION
The model and serial numbers are located on a
plate on the bottom of the cooktop. Please record
them in this guide; you will need them for warranty
registration.
COOKTOP INSTALLATION
(cont.)
FINAL CHECK
CAUTION
Do not touch cooktop glass or Cooking
Zones. They may be hot enough to
cause burns.
3
Retainer
brackets
Retainer
brackets
Retainer
brackets
Cooktop Countertop
Bolt
Preferred
installation
Alternative
installation