LG LSCI307ST - Manual (Page 17)

17
ENGLISH
O P E R AT I N G I N S T RU C T I O N S
The timer feature may be helpful if a recipe calls for
cooking for a set time. The timer can be set from 1
to 99 minutes. Once set, the digital display
between the timer or pads will begin to
count down the remaining time in minutes.
NOTE: The timer function is a minute timer only. It
does NOT turn the cooktop ON or OFF.
SETTING THE TIMER
Touch the or pads under the word
TIMER. Each touch will increase or decrease
the time by one minute, from 1 to 99 minutes.
You may also touch and hold or to
scroll up or down. The timer display will flash.
Once the desired time is set, the display will
stop flashing and the timer will start counting
down after no pad has been touched for 5
seconds. Once the timer reaches , a long
beep will sound to indicate the time is up.
CANCELING THE TIMER
To cancel the timer, touch the TIMER and
pads at the same time, OR Touch and hold the
or pad until appears in the display.
The timer display will turn off.
BRIDGE COOKING ZONES
The two left Cooking Zones can be used together
as a single Cooking Zone using the Bridge
function. This allows you to cook with larger, oblong
pans.
NOTE: When using the supplied bridge pan, it is
important to rub it with oil to prevent burning and
sticking.
ACTIVATING THE BRIDGE
COOKING ZONE
Touch the BRIDGE pad. The indicator
above the pad will light.
Touch the or pad for either left Cooking
Zone to adjust the power level for both Cooking
Zones.
NOTE:
• Use the supplied bridge pan ONLY on the bridge cooking zone.
• To purchase a replacement or additional bridge pan, call 1-800-243-0000 (U.S.A) or 1-800-542-2623
(Canada) and choose the appropriate prompt from the menu. Or, visit our Web site at us.lgservice.com
(U.S.A) or ca.lgservice.com (Canada).
USING THE BRIDGE COOKING ZONES
USING THE TIMER
1 1
2
2