Agilent Technologies AGILENT U2761A - Manual (Page 85)

Features and Functions 2
U2761A User’s Guide 67
Soft Front Panel Operation
Click Mod and select FSK as shown in
Figure 2- 22 . To output the FSK waveform, configure the
settings for the carrier frequency, output amplitude, offset
voltage, “hop frequency”, and FSK rate.
Figure 2-22 Panel view of FSK
Remote Interface Operation
FSKey:STATe {0|OFF|1|ON}
Carrier Waveform
The FSK carrier waveform consists of Sine, Square, Ramp,
Triangle, or Arbitrary waveform. The default carrier
waveform is Sine wave. You cannot use Pulse or DC as the
carrier waveform.
Soft Front Panel Operation
For Arbitrary waveforms, click Arb at the top panel
as shown in Figure 2- 2 and select the desired waveform
from the drop down list as shown in
Figure 2- 16 .