AMX NetLinx Master-Ethernet Card/Module NXC-ME260 - Manual (Page 18)

Installation and Wiring
12 NXC-ME260 NetLinx Master-Ethernet Card/Module
ICSHub OUT port
The following table describes the pinout and signal information for the ICSHub OUT port.
Ethernet 10/100 Base-T RJ-45 Connections/Wiring
The following table lists the pinouts and signals associated to the Ethernet connector. FIG. 8
describes the RJ-45 pinouts, signals, and pairing for the Ethernet 10/100 Base-T RJ-45 connector
and cable.
FIG. 8 diagrams the RJ-45 cable and connectors.
ICSHub OUT Pinouts and Signals
Pin Signal Color
1 RX + orange-white
2 RX - orange
3 ------ ------
4 ------ ------
5 ------ ------
6 ------ ------
7 TX + brown-white
8 TX - brown
Ethernet RJ-45 Pinouts and Signals
Pin Signals Connections Pairing Color
1 TX + 1 --------- 1 1 --------- 2 orange-white
2 TX - 2 --------- 2 orange
3 RX + 3 --------- 3 3 --------- 6 green-white
4 no connection 4 --------- 4 blue
5 no connection 5 --------- 5 4 --------- 5 blue-white
6 RX - 6 --------- 6 green
7 no connection 7 --------- 7 7 --------- 8 brown-white
8 no connection 8 --------- 8 brown
FIG. 8 RJ-45 wiring diagram
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
RJ-45
Plug RJ-45
Plug