ARM VERSION 1.2 - Manual (Page 130)

ARM Instruction Reference
4-20 Copyright © 2000, 2001 ARM Limited. All rights reserved. ARM DUI 0068B
4.2.5 PLD
Cache preload.
Syntax
PLD [Rn{, FlexOffset}]
where:
Rn is the register on which the memory address is based.
FlexOffset is an optional flexible offset applied to the value in Rn .
FlexOffset can be either of the following:
#expr
{-}Rm{, shift}
where:
- is an optional minus sign. If - is present, the offset is subtracted
from Rn . Otherwise, the offset is added to Rn .
expr is an expression evaluating to an integer in the range –4095 to
+4095. This is often a numeric constant.
Rm is a register containing a value to be used as the offset.
shift is an optional shift to be applied to Rm . It can be any one of:
ASR n
arithmetic shift right n bits. 1
≤
n
≤ 32.
LSL n
logical shift left n bits. 0
≤
n
≤ 31.
LSR n
logical shift right n bits. 1
≤
n
≤ 32.
ROR n
rotate right n bits. 1
≤
n
≤ 31.
RRX rotate right one bit, with extend.
This is the same offset syntax as for LDR and STR, words and unsigned
bytes on page 4-7.