ARM VERSION 1.2 - Manual (Page 82)

Assembler Reference
3-4 Copyright © 2000, 2001 ARM Limited. All rights reserved. ARM DUI 0068B
-md instructs the assembler to write source file dependency lists to
inputfile.d .
-errors errorfile
instructs the assembler to output error messages to errorfile .
-fpu name this option selects the target floating-point unit (FPU) architecture. If you
specify this option it overrides any implicit FPU set by the
-cpu option.
Floating-point instructions produce either errors or warnings if
assembled for the wrong target FPU.
The assembler sets a build attribute corresponding to name in the object
file. The linker determines compatibility between object files, and
selection of libraries, accordingly.
The assembler sets a build attribute corresponding to name in the object
file. The linker determines compatibility between object files, and
selection of libraries, accordingly.
Valid options are:
none Selects no floating-point option. This makes your assembled
object file compatible with any other object file.
vfp This is a synonym for -fpu vfpv1 .
vfpv1 Selects hardware vector floating-point unit conforming to
architecture VFPv1.
vfpv2 Selects hardware vector floating-point unit conforming to
architecture VFPv2.
fpa Selects hardware Floating Point Accelerator.
softvfp+vfp
Selects hardware Vector Floating Point unit.
To armasm , this is identical to -fpu vfpv1 . See the C and C++
Compilers chapter in ADS Compilers and Libraries Guide for
details of the effect on software library selection at link time.
softvfp Selects software floating-point library (FPLib) with
pure-endian doubles. This is the default if no
-fpu option is
specified.
softfpa Selects software floating-point library with mixed-endian
doubles.
-g instructs the assembler to generate DWARF2 debug tables. For
backwards compatibility, the following command line option is
permitted, but not required:
-dwarf2