Aiwa XR-H33MD - Manual (Page 14)

To play from front side to reverse side once only, select .
To play both sides repeatedly, select .
• When tapes are loaded in both decks, on the display indicates Continuous Play.
3 Within 10 seconds, press ENTER again.
When tapes are loaded in both decks
Press TAPE first to select a deck.
The selected deck number is displayed.
To stop play, press the
„ „ button.
To pause play (deck 2 only), press the button. To resume play, press again.
To change the playback side, press DIR/PRESET in play or pause mode.
To fast forward or rewind, press the or button in stop mode. Then press the
„ „ button to stop the tape.
To start play when the power is off (Direct Play Function)
Press the TAPE button. The power is turned on and play of the inserted tape begins.
To set the tape counter to 0000
Press the
„ „ CLEAR button in stop mode.
The counter is also set to 0000 when the cassette holder is opened.
TAPE PLAYBACK (cont.) pg. 10
CONTINUOUS PLAY
After playback on one deck finishes, the tape in the other deck will start to play without interruption.
1 Insert tapes into deck 1 and deck 2.
2 Press TAPE DECK 1/2 to select the deck to be played back first.
3 Set the reverse mode to "
".
1 Press MODE once. "DECK 2 MODE?" is displayed.
2 Within 10 seconds, press ENTER, then select "
" with MULTI JOG.
3 Within 10 seconds, press ENTER again.