Aiwa XR-H33MD - Manual (Page 29)

7 Press the EDIT/CHECK button on the remote control while pressing SHIFT to select side B and program
the tracks for side B.
After confirming B on the display, repeat step 5.
8 Press
z z TAPE REC/REC MUTE button to start recording.
The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and
recording starts. When recording on the front (side A) ends, recording on the back (side B) starts.
To stop recording
Press
„ clear. Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press the EDIT/CHECK button while pressing the SHIFT button on the remote control to select
side A or B, and press the
or button repeatedly.
To change the program of each side
Press the EDIT/CHECK button while pressing the SHIFT button on the remote control to select side A or B, and
press the
„ CLEAR button to clear the program of the selected side. Then program tracks again.
To clear the edit program
Press
„ CLEAR once in stop mode to return to the normal display.
MD RECORDING pg. 19
The sound of the CD does not decline in quality on the recording, and recording can be done easily with CD MD.
RECORDING A WHOLE CD