HP DL380z Gen8 Virtual Workstation - Manual (Page 101)

9 Battery replacement
If the server no longer automatically displays the correct date and time, you may need to replace the
battery that provides power to the real-time clock.
WARNING! The computer contains an internal lithium manganese dioxide, a vanadium pentoxide,
or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not properly handled.
To reduce the risk of personal injury:
● Do not attempt to recharge the battery.
● Do not expose the battery to temperatures higher than 60° C (140° F).
● Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
● Replace only with the spare designated for this product.
To remove the component:
1. Power down the server on page 18
2. Remove all power.
a.
Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Extend ( Extend the server from the rack on page 19 ) or remove the server from the rack.
4. Remove the access panel on page 20
5. If installed, remove the secondary PCIe riser cage.
6. Locate the battery ( System board components on page 10 ).
7. Remove the battery.
To replace the component, reverse the removal procedure.
95