HP DL380z Gen8 Virtual Workstation - Manual (Page 29)

Remove the hot-plug fan
To remove the component:
1. Extend or remove the server from the rack ( Extend the server from the rack on page 19 ).
2. Remove the access panel on page 20 .
3. Remove the fan.
CAUTION: Do not operate the server for long periods with the access panel open or removed.
Operating the server in this manner results in improper airflow and improper cooling that can lead to
thermal damage.
IMPORTANT: For optimum cooling, install fans in all primary fan locations. For more information,
refer to the fan locations table ( Hot-plug fans on page 16 ).
To replace the component, reverse the removal procedure.
Remove the hot-plug fan 23