HP DL380z Gen8 Virtual Workstation - Manual (Page 34)

Remove the air baffle
CAUTION: For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize the
amount of time the access panel is open.
To remove the component:
1. Power down the server on page 18
2. Remove all power:
a.
Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Extend ( Extend the server from the rack on page 19 ) or remove the server from the rack.
4. Remove the access panel on page 20
CAUTION: Do not detach the cable that connects the battery pack to the cache module.
Detaching the cable causes any unsaved data in the cache module to be lost.
IMPORTANT: It is necessary to remove the PCI riser cage only if there is a full-length
expansion board installed.
5. Release the full-length expansion board retainer, and then remove the PCI riser cage.
28 Chapter 3 Operations