Script file options – HP Scripting Toolkit for Windows 9.60 User Manual
Page 33
ConnectionName = UserDefinedName
HostMode = Default | Windows | Windows(degrade | openVMS | Tru64 |
Linux | Solaris | Netware | HP | Windows Sp2 ; COMMENT: The
Windows(degrade value must be entered as written.
Script file options
Options in HP SSA script files are divided into the following categories:
•
•
“Controller category” (page 34)
•
•
“Logical Drive category” (page 38)
•
Each category has several scripting options, but you do not always need to assign values to every
option. HP SSA can use default values in some instances, while in other instances, a listed option
might not be relevant for a particular configuration or scripting mode.
The options for each category are listed in the following table and described in more detail in the
remainder of this section.
Description
Options
Category
Use these options to define the overall behavior of HP SSA when it
processes scripts and creates configurations. Control options can occur
only once in a script file and must be listed first.
Action
Method
Control
Use these options to specify the controller you are configuring (or the
controller that had its configuration captured). Although the Controller
Controller
ChassisName
Controller
option must begin this section of the script, you can script other options in
this category in any order.
ClearConfigurationWithDataLoss
You can use one script file to configure all controllers in a system, and you
can configure the controllers identically or individually. If you define each
DeleteLicenseKey
DPOEnable
controller configuration individually, enter the option values for one
ElevatorSortEnable
controller and its arrays and logical drives before specifying the option
values for another controller.
ExpandPriority
IRPEnable
LicenseKey
MNPDelay
PreferredPathMode
QueueDepth
ReadCache
RebuildPriority
SSPState
SurfaceScanDelay
WriteCache
Use these options to describe an array you are configuring on the controller
previously specified in the script. (If no controller was previously specified,
Array
Drive
Array
HP SSA stops processing the script and creates an error file.) Although the
DriveType
Array option must begin this section of the script, you can script the other
options in this category in any order.
OnlineSpare
Use these options to describe a logical drive you are configuring on an
array previously specified in the script. (If no array was previously
ArrayAccelerator
LogicalDrive
Logical
Drive
specified, HP SSA stops processing the script and creates an error file.)
LogicalDriveSSPState
Using HPSSASCRIPTING
33