Obtaining a specific configuration – HP Scripting Toolkit for Windows 9.60 User Manual

Page 52

Advertising
background image

<DIR_OBJECT_DN VALUE = " "/>

<DIR_OBJECT_PASSWORD VALUE = ""/>

<DIR_USER_CONTEXT_1 VALUE = ""/>

<DIR_USER_CONTEXT_2 VALUE = "_"/>

<DIR_USER_CONTEXT_3 VALUE = ""/>

</MOD_DIR_CONFIG>

<MOD_NETWORK_SETTINGS>

<SPEED_AUTOSELECT VALUE = "Y"/>

<NIC_SPEED VALUE = "100"/>

<FULL_DUPLEX VALUE = "Y"/>

<IP_ADDRESS VALUE = "11.222.333.444"/>

<SUBNET_MASK VALUE = "222.222.222.0"/>

<GATEWAY_IP_ADDRESS VALUE = "11.100.200.2"/>

<DNS_NAME VALUE = "ILOD234KJ44D002"/>

<PRIM_DNS_SERVER value = "16.16.1.161"/>

<DHCP_ENABLE VALUE = "Y"/>

<DOMAIN_NAME VALUE = "americas.cpqcorp.net"/>

<DHCP_GATEWAY VALUE = "Y"/>

<DHCP_DNS_SERVER VALUE = "Y"/>

<DHCP_STATIC_ROUTE VALUE = "Y"/>

<DHCP_WINS_SERVER VALUE = "Y"/>

<REG_WINS_SERVER VALUE = "Y"/>

<PRIM_WINS_SERVER value = "16.16.6.161"/>

<STATIC_ROUTE_1 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/>

<STATIC_ROUTE_2 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/>

<STATIC_ROUTE_3 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/>

</MOD_NETWORK_SETTINGS>

<ADD_USER

USER_NAME = "Administrator"

USER_LOGIN = "Administrator"

PASSWORD = "">

</ADD_USER>

<ADD_USER

USER_NAME = "Landy9"

USER_LOGIN = "mandy9"

PASSWORD = "">

</ADD_USER>

<RESET_RIB VALUE = "Y"/>

</HPONCFG>

For security reasons, the user passwords are not returned.

Obtaining a specific configuration

A specific configuration can be obtained using the appropriate XML input file. For example, the
contents of a typical XML input file, get_global.xml, are the following:

<!-- Sample file for Get Global command -->

<RIBCL VERSION="2.0">

<LOGIN USER_LOGIN="x" PASSWORD="x">

<RIB_INFO MODE="read">

52

Scripting Toolkit utilities

Advertising