HP LaserJet 5200 Printer series User Manual
Page 151
Control panel message
Description
Recommended action
return to the Ready state when the page
has printed.
Printing... MENU MAP
The printer is generating the printer menu
map. The printer will return to the Ready
state when the page has printed.
No action necessary.
Printing... REGISTRATION PAGE
The printer is generating the registration
page. The printer will return to the SET
REGISTRATION menu when the page has
printed.
Follow the instructions on the printed pages.
Printing... SUPPLIES STATUS
The printer is generating the supplies status
page. The printer will return to the Ready
state when the page has printed.
No action necessary.
Printing... USAGE PAGE
The printer is generating the usage page.
The printer will return to the online Ready
state when the page has printed.
No action necessary.
PROCESSING DUPLEX JOB
alternates with
Do not grab paper until job completes
During duplex printing, the paper emerges
for a short time before it is pulled back into
the printer.
Do not pick up pages until they come to
rest in the output bin.
Processing...
The printer is currently processing a job but
is not yet picking pages. When the media
begins to move, this message is replaced
by a message that indicates which tray the
job is being printed from.
No action necessary.
Processing... from tray<X>
The printer is actively processing a job from
the designated tray.
No action necessary.
RAM DISK DEVICE FAILURE
alternates with
Ready
To clear press
The RAM disk has failed.
1.
Printing can continue for jobs that do
not require the RAM disk.
2.
To remove this message from the
display, press
.
RAM DISK FILE OPERATION FAILED
alternates with
Ready
To clear press
The printer received a PJL file system
command that attempted to perform an
illogical operation (for example, to
download a file to a non-existent directory).
1.
Printing can continue.
2.
To remove this message from the
display, press
.
3.
If the message reappears, there might
be a problem with the software
program.
RAM DISK FILE SYSTEM IS FULL
alternates with
Ready
To clear press
The printer received a PJL file system
command to store something on the file
system, but the file system is full.
1.
Use HP Web Jetadmin software to
delete files from the RAM disk
memory and try again.
2.
To remove this message from the
display, press
.
for more information.
ENWW
Control-panel messages
137