HP LaserJet 5200 Printer series - Manual (Page 50)

Item Values Explanation
ON ON: If an error occurs that prevents printing, the message
appears on the printer control-panel display, and the printer
goes offline for 10 seconds before returning online.
OFF: If an error occurs that prevents printing, the message
remains on the printer control-panel display, and the printer
remains offline until you press
.
The default setting is ON.
CARTRIDGE LOW STOP
CONTINUE
Determines how the printer behaves if the print cartridge is
low. Print quality is not guaranteed if you print after receiving
this message.
STOP: The printer pauses printing until you replace the print
cartridge or press
each time you turn the printer on. The
message appears until you replace the print cartridge.
CONTINUE: The printer continues to print, and the message
appears until you replace the print cartridge.
The default setting is CONTINUE.
CARTRIDGE OUT STOP
CONTINUE
Determines how the printer reacts if the print cartridge is
empty.
STOP: The printer stops printing until you replace the print
cartridge.
CONTINUE: The printer continues to print, and the
REPLACE CARTRIDGE message appears until you replace
the print cartridge. HP does not guarantee print quality if you
select CONTINUE after a REPLACE CARTRIDGE
condition. Replace the print cartridge as soon as possible to
ensure good print quality.
If the end of drum life is reached, the printer stops,
regardless of the CARTRIDGE OUT setting.
The default setting is CONTINUE.
JAM RECOVERY AUTO
OFF
ON
Determines how the printer behaves if a jam occurs.
AUTO: The printer automatically selects the best mode for
printer jam recovery (usually ON).
OFF: The printer does not reprint pages following a jam.
Printing performance might be increased with this setting.
ON: The printer automatically reprints pages after a jam is
cleared.
The default setting is AUTO.
RAM DISK AUTO
OFF
Determines how the RAM disk is configured.
AUTO: Allows the printer to determine the optimal RAM-disk
size based on the amount of available memory.
OFF: The RAM is disabled.
36 Chapter 2 Control panel ENWW