HP StorageWorks XP10000 Disk Array - Manual (Page 165)

• Cancel: Cancels the release Volume Manager operation.
Reset LUSE Confirmation pane
When you select Reset LUSE Volume from the Volume Manager operation shortcut menu, the following
pane appears. You can confirm the LDEV that is still not registered to the array as a LUSE volume and
whether or not you want to reset this unregistered LUSE volume to the state it was in before it was created.
Figure 88 Reset LUSE Confirmation pane
• Unregistered LUSE volume list
Displays LDEVs created into a LUSE volume but not yet registered to the array that you can reset to
the state they were in before they were created.
• LDEV: LDEV icon, CU number, and LDEV number.
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the HP StorageWorks External Storage XP user guide .
NOTE:
If an LDEV number ends with V (for example, 00:01V), the LDEV is a virtual volume (V-VOL). For
more information about V-VOLs, see the HP StorageWorks Snapshot XP user guide .
• Emulation: LDEV's emulation type.
• Capacity: LDEV's capacity.
• OK: Resets the unregistered LUSE volume to the state it was in before it was created.
• Cancel: Cancels the reset LUSE operation.
Concatenation List pane
In the array, data can be written to an LDEV that extends over concatenated parity groups. Concatenation
of parity groups enables faster access to data.
To view a concatenated parity group, right-click the free LDEVs you want to form the LUSE volume
in the LDEV Information table. If parity groups are concatenated, a shortcut menu appears. Select
Concatenation List to display the Concatenation List pane.
HP StorageWorks LUN Configuration and Security Manager XP user guide for the
XP12000/XP10000/SVS200
165