HP StorageWorks XP10000 Disk Array - Manual (Page 166)

Figure 89 Concatenation List pane
NOTE:
If a parity group number starts with E (for example, E1-1), the parity group consists of one or more
external LUs.
Volume Manager operations
This section provides instructions for performing Volume Manager operations.
Preparing to use Volume Manager
Before starting a Volume Manager operation on a selected array, unmount the open system volumes, and
remove the LU paths to the open volumes. For instructions, see Deleting LU paths .
Volume Manager operations
If you are going to implement changes for Volume Manager, you must have write permission for Volume
Manager, and must be in Modify mode. The array information icons are on the upper right corner. These
icons are described in detail in the HP StorageWorks Command View XP user guide for XP Disk Arrays or
the HP StorageWorks XP Remote Web Console user guide for XP12000/XP10000/SVS200.
Viewing LUSE configuration information
You can view the current LUSE configuration on the Volume Manager pane ( Figure 84 ).
• The LDEV Information tree displays an outline view of CU and LDEV numbers installed on the
array in a hierarchical structure.
• The LDEV Information table displays detailed information for all open-system LDEVs in the selected
CU. If you select a normal LDEV, information in this table is for the top LDEV. If you select a LUSE
volume, information in this table is for all the LDEVs in the LUSE volume.
166 Volume Manager operations