HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 100)

Command line 100
supportinfo
Generate and transfer a support information file to a remote FTP or TFTP server on the network.
Supported actions: help, save
Item Description
save supportinfo Generate and transfer a Virtual Connect support information file to a remote TFTP or
FTP server.
Syntax
save supportinfo address=<tftp://ipaddress/[filename] |
ftp://user:password@ipaddress>/[filename]
Property
address (required) A valid IPv4 address of a TFTP or FTP server, with user name, password (where
required), and name of the file to which the generated support info will be stored on
the FTP server. If not specified, the default file name is "vc-support-info".
Examples
->save supportinfo address=tftp://192.168.10.12
Saves a support information file to a remote TFTP server
->save supportinfo
address=ftp://user:[email protected]
Saves a support information file to a remote FTP server
systemlog
View the Virtual Connect Manager system event log.
Supported actions: help, show
Item Description
show systemlog Display the Virtual Connect Manager system log.
Syntax
show systemlog [-Last=<n>] [-First=<n>] [-Pause=<n>]
Options
Last Displays the last n records. If this option is specified and no value is provided, the
last 10 records are displayed.
First Displays the first n records. If this option is specified and no value is provided, the
first 10 records are displayed.
Pause The number of records to be viewed before prompting for a key press. Valid values
include numbers between 1 and 40.
Examples
->show systemlog
Displays the entire system log
->show systemlog -pause=8
Displays the system log, eight records at a time
->show systemlog -first=12
Displays the first twelve records from the system log
->show systemlog -last=8
Displays the last eight records from the system log
->show systemlog -last=20 -pause=6
Displays the last twenty records from the system log, six records at a time
To add a remote target, see "add log-target (on page 56 )."