HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 107)

Command line 107
Item Description
Adds a new user by specifying the minimal amount of properties
->add user bill Password=HGtwf7272562
Privileges="domain,network" FullName="Bill Johnson"
[email protected] Enabled=true
Adds a new user and configures additional user properties
->add user Admin Password=hjkhfd Privileges=*
Adds an Admin user with all privileges
Item Description
remove user Remove a user from the Virtual Connect Manager database.
Syntax
remove user <username|*>
Parameter
UserName (required) The name of an existing user to be removed. Use "*" to remove all users except for
the default Administrator account.
Examples
->remove user steve
Removes a specific user by name
->remove user *
Removes all users except the default Administrator account
Item Description
set user Modify attributes of an existing user.
Syntax
set user <UserName> [<password>] [FullName=<Full Name>]
[ContactInfo=<Contact Details>] [Enabled=<True|False>]
[Privileges=<Storage|Network|Server|Domain|*>]
Parameter
UserName (required) The name of the user to modify
Properties
Password (optional) The new password of the user can be entered as clear text in the command. If the
Password value is blank, you are prompted to enter the password, and the
characters entered are masked. When a domain is first created, the default
minimum length of a password is 8 characters. Virtual Connect allows a password
length between 3 and 40 characters. The password length can be adjusted using
the set user-security command.
FullName (optional) The full name of the user
ContactInfo
(optional)
Contact information for the user
Enabled (optional) Enables or disables the user. Valid values include "true" and "false". The default
value is "true".
Privileges
(optional)
The allowed privileges for the user. The privileges can be any combination of
"domain", "server", "network", or "storage" separated by commas. If no privileges
are specified, the user can view domain information only. Use "*" to specify all
privileges.
Examples
->set user steve Password=fgY87hHl
Modifies an existing user password
->set user steve Password
Modifies an existing user password, masked at the prompt
->set user bill Password=HGtwf7272562
Privileges="domain,network" FullName="Bill Johnson"