HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 109)

Command line 109
Item Description
Displays user security settings
vcm
Reset the Virtual Connect Manager.
Supported actions: help, reset
Item Description
reset vcm Reset the Virtual Connect Manager. A failover to the backup VCM can also
be specified (optional), if a backup VCM is available.
IMPORTANT: Resetting the VCM causes a temporary loss in connectivity with
the Virtual Connect Manager. If failover is specified and a backup VCM
exists, users are logged off and must reconnect using the backup VCM IP
address.
Syntax
reset vcm [-failover]
Option
Failover Forces a failover from the current primary VCM to the backup VCM.
Examples
->reset vcm
Resets the Virtual Connect Manager
->reset vcm -failover
Resets the Virtual Connect Manager and forces a failover to the backup
VCM (if available)
User privileges
The following table lists required user privileges for CLI commands.
Command Element Domain Network Server Storage All access
add banner X — — — —
enet-connection — — X — —
fabric — — — X —
fc-connection — — X — —
fcoe-connection — — X — —
isci-connection — — X — —
storage-management — — — X —
ldap-group X — — — —
radius-group X — — — —
log-target X — — — —
nag-network — X — — —
network — X — — —
network-access-group — X — — —