HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 14)

Introduction 14
#------------------------------------------------------------------------
# Add Users
add user SomeNetworkUser password=pass1 privileges=network
add user SomeStorageUser password=pass2 privileges=storage
add user SomeDomainUser password=pass6 privileges=domain
add user SomeAdminUser password=pass3 privileges=*
add user DomainNetworkUser password=764dhh privileges=domain,network
# Add Profiles with Default VC-Enet and VC-FC Connections
add profile MyProfile
add profile AnotherProfile
add profile Profile45
# Add VC-Enet Networks
add network MyNetwork
add network Network2
# Add uplink ports to the networks
add uplinkport enc0:1:1 network=MyNetwork
add uplinkport enc0:1:2 network=Network2
# Create a Shared Uplink Port Set
add uplinkset SharedSet1
# Assign a profile to a device bay
assign profile MyProfile enc0:1
# Done!!!
Unassigning multiple profiles
The unassign profile command includes the ability to unassign multiple profiles from device bays with
a single command.
The following example illustrates four server profiles being unassigned from device bays with a single CLI
command. If an operation fails on one of the device bays, an error message appears for that server or device
bay, but the remaining operations continue.
->unassign profile *
SUCCESS: Profile1 unassigned from device bay enc0:1
SUCCESS: MyProfile2 unassigned from device bay enc0:2
SUCCESS: GreenProfile unassigned from device bay enc0:3