HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 24)

Command line 24
Item Description
ModuleID
(required)
The ID of the module for which to display the connection map information. The module
must be a FlexFabric module. The ID is in the format of
<EnclosureID>:<BayNumber>.
Example
->show connection-map enc0:1
Displays the connection map information for the module in bay 1 of enclosure enc0
devicebay
Manage general enclosure device bay settings and information.
Supported actions: help, show
Item Description
show devicebay Display device bays of all enclosures that exist in the Virtual Connect domain.
Syntax
show devicebay [<DeviceBayID>|*]
Parameter
DeviceBayID
(Optional)
The reference ID of a device bay in the domain
The format of the device bay ID is <EnclosureID:DeviceBay>.
Example: “enc0:1” indicates device bay 1 of the local enclosure being managed.
Use "*" to display detailed information for all enclosures.
If EnclosureID is not specified, the default enclosure is the local enclosure where
the Virtual Connect Manager and domain exist.
If a multi-blade server is present, use the DeviceBayID of the monarch bay. This is
the ID value shown by show devicebay.
Examples
->show devicebay
Displays a summary listing of all device bays
->show devicebay *
Displays detailed information for all device bays
->show devicebay enc0:2
Displays detailed information for device bay 2 of the local enclosure
->show devicebay enc1:4
Displays detailed information for device bay 4 of a remote enclosure
->show devicebay enc0:5
Displays detailed information for a multi-blade server in device bays 5-8 of the
primary enclosure.
domain
Manage general Virtual Connect domain settings and information.
Supported actions: delete, help, set, show
Item Description
delete domain Delete the existing Virtual Connect domain configuration.
Deleting the domain removes the entire Virtual Connect domain configuration and
resets it to the original defaults. After the domain is deleted, you are logged out and
the Virtual Connect Manager resets.
Syntax
delete domain [-quiet]