HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 61)

Command line 61
Item Description
network to network access group associations appears.
Examples
->show nag-network
Displays a summary of all network to network access group associations in the domain
->show nag-network *
Displays detailed information for all network to network access group associations in
the domain
->show nag-network DatabaseNetGroup:Net1
Displays detailed information about the association between a specified network
access group and a specified network
name-server
Display a snapshot of all hosts and direct attached storage devices for the specified FlexFabric module.
Supported actions: help, show
Item Description
show name-server Display a snapshot of all hosts and direct attached storage devices for the specified
FlexFabric module.
Syntax
show name-server <ModuleID>
Parameter
ModuleID
(required)
The ID of the module for which to display the name server information. The module must
be a FlexFabric module. The ID is in the format of <EnclosureID>:<BayNumber>.
Example
->show name-server enc0:1
Displays the name server information for the module in bay 1 of enclosure enc0
network
Manage Virtual Connect Ethernet networks.
Supported actions: add, help, remove, set, show
Item Description
add network Create a new Ethernet network. After the network is created, uplink ports can be added
if the network is not using a shared uplink set.
The SmartLink property is no longer supported during the creation of the network. If
specified, it is ignored. To configure the SmartLink attribute, use the set network
command.
Syntax
add network <NetworkName> [-quiet]
[Nags=<nagName>[,<nagName2>,...]] [UplinkSet=<UplinkSetName>
VLanID=<VLanID>] [State=<Enabled|Disabled>]
[NativeVLAN=<Enabled|Disabled>] [Private=<Enabled|Disabled>]
[ConnectionMode=<Auto|Failover>]
[VLanTunnel=<Enabled|Disabled>] [PrefSpeedType=<Auto|Custom>]
[PrefSpeed=<100Mb–10Gb in 100Mb increments]
[MaxSpeedType=<UnRestricted|Custom>] [MaxSpeed=<100Mb–10Gb in
100Mb increments>]
Parameter
NetworkName
(required)
The unique name of the new network to create. Valid characters include alphanumeric,