HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 82)

Command line 82
Item Description
with the pattern VCX01.
Examples
->set serverid Type=Factory-Default
Modifies virtual server ID settings to use factory default serial numbers
->set serverid Type=VC-Defined PoolId=5
Modifies virtual server ID settings to use VC-defined serial numbers
->set serverid Type=User-Defined Start=VCX0000001
End=VCX0100010
Modifies virtual server ID settings to use a custom, user-defined serial number range
Item Description
show serverid Display virtual server ID configuration properties.
Syntax
show serverid
Example
->show serverid
Displays virtual server ID configuration properties
server-port
Display the physical server ports.
Supported actions: help, show
Item Description
show server-port Display physical server port information. If the port is unlinked and no connectivity
exists, the cause is displayed. For more information about possible causes, see
"Port status conditions (on page 158 )."
Syntax
show server-port [<PortID>]
Parameter
PortID (Optional) The reference of a port mapping ID. The PortID format is
<EnclosureID:IOBay:Port>. The PortID can be referenced from the ID column
in the summary. The detailed display shows all FlexNICs that could be associated
with a server port.
Examples
->show server-port
Displays a summary of all physical server ports
->show server-port *
Displays detailed information for all physical server ports
->show server-port enc0:3:d2
Displays detailed information for a specific server port
->show server-port enc0:1:d4
Displays detailed information for the Device Control Channel
server-port-map
Manage shared server downlink port mapping configuration.
Supported actions: add, help, remove, set, show