HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 86)

Command line 86
Item Description
Syntax
set snmp <Type> [ReadCommunity=<ReadCommunityString>]
[SystemContact=<SystemContact>] [Enabled=<true|false>]
[SmisEnabled=<true|false>]
Parameter
Type (required) Indicates which SNMP configuration to modify. Valid values include "Enet" and
"FC".
Properties
ReadCommunity
(optional)
Read-Only Community String for the SNMP configuration. The default value is
"public". If the type is "Enet", the maximum length of the read community string is
39 characters. If the type is FC, the maximum length is 12 characters.
SystemContact
(optional)
SNMP system contact information.
Enabled (optional) Enables or disables the SNMP agent. The default value is "true". Valid values
include "true" or "false".
SmisEnabled
(optional)
Enables or disables SMIS. This property is valid only for VC-FC modules. The default
value is "false". Valid values include "true" or "false".
Examples
->set snmp enet ReadCommunity=mydatacenter1
[email protected] Enabled=true
Enables the SNMP agent for VC-Enet modules and supplies a community string
->set snmp fc ReadCommunity=mydatacenter
SystemContact=FcAdmin Enabled=true
Enables the SNMP agent for VC-FC modules
Item Description
show snmp Display the SNMP configuration settings for the VC domain.
Syntax
show snmp [Type]
Parameter
Type (optional) Indicates the type of SNMP configuration to display. If the type is not specified, all
VC SNMP configuration information appears. Valid values include "Enet" and
"FC".
Examples
->show snmp Enet
Displays SNMP configuration for VC-Enet modules only
->show snmp FC
Displays SNMP configuration for VC-FC modules only
->show snmp
Displays SNMP configuration for all modules
snmp-access
Manage SNMP access.
Supported actions: add, help, remove, show
Item Description
add snmp-access Add new ranges of IP addresses that will be permitted to access VC Ethernet
modules through the SNMP interface.