HP LaserJet Pro M1536dnf MFP SERIES - Manual (Page 69)

1. Load the paper face-up, top forward in the input
tray.
2. Adjust the guides until they are snug against
the paper.
Load the document feeder
NOTE: When you add new paper, make sure that you remove all of the paper from the input tray and
straighten the stack of new paper. Do not fan the media. This reduces jams by preventing multiple sheets
from feeding through the product at one time.
CAUTION: To prevent damage to the product, do not load an original document that contains
correction tape, correction fluid, paper clips, or staples. Also, do not load photographs, small originals,
or fragile originals into the document feeder.
The document feeder holds up to 35 sheets of 60 to 90 g/m 2 (16 to 20 lb) bond paper.
ENWW Load the document feeder 55